1 / 3
Monitor Stand legs (IKEA hack) — image 1
1 / 3

Monitor Stand legs (IKEA hack)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€12.64 – €15.45 net (excluding VAT)

For file: Monitor_Stand_Supports_PrusaMini_PLA_0.28mm_PLA_MINI_11h21m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €14.05 excluding VAT (range midpoint).

Weight reported by the author
232 g
Print time reported by the author
11.35 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Use these 3D-printed supports to make a monitor stand for less than $20.

Rating
5 / 5
Likes
88
Downloads
407
Makes
3
Views
3,295
Reviews
2

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Noncommercial — Share Alike

Use these 3D-printed supports to make a monitor stand for under $20. 
Here's how:

Non-printed parts

  • IKEA BERGSHULT shelf. There are different sizes, but the one we used is 80 cm x 20 cm and 20 mm thick. We've included the F3D file so you can adjust the size however you like using Fusion 360.
  • Self-tapping screws, 4 x 30 mm.
  • Optional: cork sheet with adhesive backing. To prevent any scratches on your desk surface. You'll need to cut two strips of size 20 mm x 160 mm.

Printing

These should be printed lying on a side, using 4 perimeters and 20% grid infill to make them sturdy.

The option to generate support material should be turned off.

We printed them using Polymaker's Polyterra PLA Charcoal Black (affiliate).

Tip: using matte filament gives you a better surface finish and a more elegant look.


Follow us / support

Did you like this design? Follow us on Instagram! We are @twothingies

 

 

If you really like what we are doing and want to support us, you could buy us a coffee or two! or order quality filament through one of our affiliate links!

 

Selling prints of our designs

Please be aware that our designs are available for free for non-commercial purposes only. 

If you want to sell 3D prints of our designs in your store, you can join one of our membership tiers!

If you have other ideas, we would be happy to discuss them with you! Please send us a message if you are interested at [email protected]

 

Disclaimer

Due to the different properties of 3D printing filaments and the tolerances of different machines, you might need to scale up or down some of the print files, in case they don't fit when you print them. 

Tags