Desk Stranding Switch Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter plate which lets a smaller switch fit into the Desk Stranding larger switch cutout.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 79
- Makes
- 0
- Views
- 392
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
I had already printed the main body of Nils Kal's Desk Stranding model before realizing I didn't have any big switches that would fit the cutout, but I did have a bunch of smaller switches. This adapter plate makes those fit into the original cutout and adds some aesthetics that try to align with the original creator's.
This was a pretty tight fit and I printed at 0.1mm layer height to try and get some definition around the locking features though probably not necessary. Prints flat on the outer face with no supports.
I don't remember the exact part number but the switch I used has a body roughly 8.4mm x 13.5mm which is what the cutout here is sized for.