Fishing Reel Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a way to mount my baitcasting reels to the wall. This design supports the baitcaster and other reels
- Rating
- 5 / 5
- Likes
- 41
- Downloads
- 315
- Makes
- 1
- Views
- 1,805
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
[Updated - Feb-2025]
Someone printing the Left Hand Reel mount informed me I had reversed the threads on that model. Embarrassing. I corrected the threads
[Updated]
Added a v2 file for both Right- and Left-handed reel mounts. The only change I made is to the build-plate surface area to improve adhesion. Otherwise, the files are the same.
I needed a way to mount my baitcasting reels to the wall for storage. This design supports the baitcaster and spinning reels. In order to allow room for the handle, the mount is offset to one side. So there is a right-hand reel and a left-hand reel option. Print the one you need, and then one screw and one sliding coupler.
Print them as oriented. I do not need supports, but there is a decent overhang so check your cooling. A brim may be helpful for adhesion. Print threaded parts at 0.2 layer height or less. If the threads are a little stiff, just run them back and forth a couple times.
I'd love to see your makes!