Chef's Path grid insert
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.51 – €1.84 net (excluding VAT)
For file: Chefs Path Base - Long Lines v10_0.2mm_PLA_MINI_1h49m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.68 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 1.82 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Help keeps silica gel beads from getting lodged in Prusament Hex patterned spools.
- Rating
- 4.8 / 5
- Likes
- 34
- Downloads
- 122
- Makes
- 5
- Views
- 2,209
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Having purchased some Chef's Path containers to help store my open filament spools. I opted to add some colour changing silica gel beads into each container to help ensure moisture wasn't going to be a problem.
However, using the Prusament spools I found the beads would sometimes stick in the hexagonal pattern of the spool. So here's a simple solution, a grid that helps keep the spool away from the beads. Whilst also ensuring the beads are visible, so you know when they need to be re-charged (assuming you have the colour changing silica gel beads)
Designed to be printed on a Prusa Mini, so isn't quite as large as big as I'd want it to be (ideally would fit edge to edge, but that's not possible on the Prusa Mini print bed).
Printing
- Rotate part on Z axis by 45°
- Material: I used Prusament Galaxy Black PLA
- Print Settings (PrusaSlicer): 0.20mm Speed, 15% infill.
- Supports: None
- Print Setting→ Skirt and brim→ Loops: 0 (avoid the initial loop which due to size of print can attach to corners of the print)
Parts
- Chef's Path 4L Cereal containers: https://amzn.to/3s5KNQI
- Temperature/Hygrometer: https://amzn.to/3CIF34q
- 3D insert for Hygrometer: https://www.prusaprinters.org/prints/72501-hygrometer-insert-for-chefs-path-cereal-containers
- Colour changing silica gel beads: Source via eBay as Amazon prices were a lot higher.