1 / 3
Small Bakelite RPG Clamp
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This was an RPG clamp that went on the narrower diameter bakelight portion of the RPG.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 28
- Makes
- 0
- Views
- 169
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Public Domain
This is one of two clamps that I made to fit the narrower diameter bakelight portion of a prop RPG. There is also a large clamp STL in my designs that goes on the wider portion of the bakelight section of the RPG.
Printed with PLA at a 0.2 layer height, no supports needed really.
The clamp is secured with a M3 screw and washer.