1 / 3
Parametric CPAP Hose Coupler
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
CPAP Hose Coupler made parametric using Fusion 360 so it will fit your hose.
- Rating
- 5 / 5
- Likes
- 68
- Downloads
- 267
- Makes
- 3
- Views
- 1,454
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial
Coupler for keeping CPAP hose together so it doesn't come unhooked in the night. Also likely good for extension cords or any other connections in need of reinforcement.
Separate variables for:
- Internal length
- Overall internal diameter
- Separate variables for slots on each end to allow for mismatched hoses (cords)
V3 is a open side cylinder, stronger but bulkier
V4 is open on both sides and slots are from opposite sides
Recommend opening in Fusion 360 and modifying variable to meet your application
Supports recommended, though bottom side will be rough. See PrusaSlicer photos for recommended orientation. Rotate Y -90 degrees to match.