1 / 3
Kemo Power Control (M012) box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A box for Kemo Power Control module M012
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 26
- Makes
- 0
- Views
- 225
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Disclaimer: with this you are going to be dealing with AC. By using this model you take full responsibility.
This is a simple electronics box for Kemo Power Control module. Has a hole for the potentiometer so it can be adjusted with a flathead scredriver.
Needs:
- 4x 16-20mm M3 countersunk screws for the lid
- 4x 10-12mm M3 screws for cord locking
I used PETG.
Note: my Kemo-module is at least 10 years old so I hope the dimensions haven't changed… :)