AMS RAISER, DRAWERS, PLATE STORAGE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
AMS RAISER, DRAWERS, PLATE STORAGE
- Rating
- 0 / 5
- Likes
- 31
- Downloads
- 148
- Makes
- 0
- Views
- 1,477
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
you might need to sand the mating parts a little because of your printer/filament. the clearance on the model is zero.
you will need to print:
2 copies of the first plate with the main drawer.
2 copies of the second plate with the drawer face, and a left and right side panel.
1 extra copy of the Left and Right side panels (totaling 3 of each)
1 each of the remaining plates
The plates where arranged to minimize filament changes.
You will need support for some of the areas. Some you might be able to get by with just bridging. But for the joints It will need more cleanup. and it is not an excessive amount of support.
There is a plate for a gasket to be printed from TPU, I found it best to just use a little weather stripping. And not print the TPU
Assemble the rear left and Right part, and the front Left and right. THEN the front pair with the Rear pair.