Drill Press Track Block for Toggle Clamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A sliding/rotating T-track block for a drill press table with inset for a toggle clamp, typically used as a hold down.
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 95
- Makes
- 0
- Views
- 465
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I didn't like the screw down clamps that came with the drill press table because they kept falling apart and you would need to constantly screw it as you changed your wood pieces. I made a sliding/rotating toggle clamp to hold down the work piece that can lock in place.
Printing Tips
This can be very easily printed in the default orientation, with no supports. I printed with 100% infill in PETG and 3 perimeters so it was very solid, but I think something like 30% gyroid infill should do fine as well if the layer bonding is good.
Hardware
Toggle Clamps: https://a.co/d/aoacPtM
Screws (non-countersunk screws may be better): https://a.co/d/6ok9XXq
T-track Knobs (you may prefer standard t-bolts): https://a.co/d/6pqZKDN