12mm LED Pixel Hand Pusher
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tool to push 12mm bullet pixels into 12mm holes by hand.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 50
- Makes
- 0
- Views
- 281
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a tool to push 12mm pixels into holes. The bell-shaped palm fits nicely into the hand, making pixel-pushing much less painful. Since this tool fits over the wire side, it is great for pushing pixels without a receiving piece into very large plastic grids or coro props that cannot easily be accessed on both sides.
I printed it in PETG for durability, but PLA would probably be fine too. I printed with .4mm layers and a .6mm nozzle, but I doubt it matters. What does matter is making sure the walls are 3 or 4 layers thick for strength. %15-20 infill is plenty. No supports are needed, but if your overhangs aren't perfectly tuned (like mine weren't), lightly sanding the rounded edge where your palm goes might be a good idea.
Feel free to copy and modify the source on OnShape: https://cad.onshape.com/documents/0800a7a6f2381ada499dabab/w/e781e4c13ee71630310bd97e/e/8dbf8c7d32e6baf7430e2e7a?renderMode=0&uiState=65b858540c19bc46b02b294d