Mantis + LGX + CNC TAP
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Has options for mount points and I wanted and kept the extruder low. still room for improvement
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 37
- Makes
- 0
- Views
- 596
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
I couldn't find a mount for the Mantis tool head using a CNC TAP (chaotic labs v2) and LGX. This gives the ability to mount to the CNC tap from the rear (using heatsets) and ties into the mantis hot end mounts for the TAP nicely. you can undermount to the LGX as well, but it's not needed.. it's very rigid without doing so.
I used the base LGX adapter model from Bondtech and added the needed drawings/dimensions to match the CNC tap and hot end mount. This has only been tested with the Dragon HF adapter, but printed versions (Mantis with TAP from MrTeliP) of the mosquito and Goliath also match up nicely.
Ideally, print with the base Voron settings. The models should be oriented correctly, but if not, print with the Voron logo on the print plate.
Hats off to @MrTeliP for the excellent TAP Mantis mod I'm using in conjunction with this, you can download their model(s) here : https://www.printables.com/model/369601-voron-tap-mantis-mod
DESIGN UPDATES:
20240130 - added a variation with supports for the rear of the fan. added rigidity reduces input shaper resonances significantly. There are also cable ziptie holes for cable management on this variation.