1 / 3
Slim Case for Raspberry Pi 5 with Active Cooler
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A slim Raspberry Pi 5 case that covers the top but leaves the active cooler exposed. Screws required.
- Rating
- 4.875 / 5
- Likes
- 105
- Downloads
- 707
- Makes
- 11
- Views
- 2,934
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Parts required:
- 4x m2.5x12mm screws
- 4x m2.5 nuts
While slicing, I used supports for the SD card slot and the screw holes but it's possible they may not all need supports.
After printing, poke holes through the thin top layer that is covering the screw holes.
Use care when adding the lid to not pinch the active cooler wires.
Filament used was Prusament Galaxy Black PLA.