1 / 2
OnAir-Light
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I created this housing for implementing an automatic OnAir-Light for DAW
- Rating
- 0 / 5
- Likes
- 40
- Downloads
- 85
- Makes
- 0
- Views
- 539
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Open Community License v1
I created this housing for implementing an automatic OnAir-Light for DAW using this instruction.
The front panel is printed with a manual filament change.
I use a generic type-C AtMega 32U4 Board and WS2812B led strip with approximately 30 leds per meter.
All parts are printed without support, for assembly you will need 4 M3x25mm sink head screws.
===================================================================
Update: I redesigned the Back to allow longer 32U4-boards. I also redesigned the support to not thow any shadow any more.