Sticky Note Dispenser - HSW (Honeycomb Storage Wall)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple 3" x 3" sticky note dispenser remixed for the HSW (Honeycomb Storage Wall)
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 146
- Makes
- 2
- Views
- 591
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a Sticky Note dispenser easily accessible on my honeycomb storage wall, so I found a dispenser design for the Sticky Notes that I already had, and remixed it to make it compatible with the honeycomb storage wall.
I recommend printing this vertically to eliminate the need for supports, 0.2mm layer height for better quality, even though it may take longer to print.
This model uses a m3 8mm screw with 3" x 3" Post-it Notes.
To use this add the Post-it Notes to the slot and just pull from the top middle forward to take one out.
F3D and STEP Files are provided, feel free to remix it.
If there are any other variations that you would like, don't be afraid to request them in the comments.
Thanks for reading, Happy Printing!