1 / 2
Gehäuse für HomeMatic HM-OU-CM-PCB Funk-Gong und einen DC Konverter — image 1
1 / 2

Gehäuse für HomeMatic HM-OU-CM-PCB Funk-Gong und einen DC Konverter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€2.39 – €2.93 net (excluding VAT)

For file: GongAktor_0.2mm_PETG_MK3S_2h41m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €2.66 excluding VAT (range midpoint).

Weight reported by the author
35 g
Print time reported by the author
2.69 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Gehäuse für HomeMatic HM-OU-CM-PCB Funk-Gong und einen DC Konverter zum Anschluß von Aktivlautsprechern

Rating
0 / 5
Likes
0
Downloads
28
Makes
0
Views
568
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

Gehäuse für HomeMatic HM-OU-CM-PCB Funk-Gong und einen DC Konverter.

Ziel der Übung war, ein paar kleine, günstige, aktive Brüllwürfel an den Gong anzuschließen und mit einem kleinen Netzteil mit Strom zu versorgen. Ich hab ein 12V 1,5A Netzteil genommen. Der DC Converter macht dann 5V für die Lautsprecher draus.

Benötigt, neben dem HM-OU-CM-PCB: 3 M3x5 Schrauben, ein DC Konverter ( https://de.aliexpress.com/item/1005002524322734.html ) und ein paar kleine, nicht zu hungrige Boxen (zB https://www.amazon.de/dp/B01LZWX5X0/ref=cm_sw_em_r_mt_dp_XJZMAVYQM7Z6JB3S0PDD ) und optional ne SD Karte für zusätzliche Töne….

Fröhliches DingDong

Tags