1 / 3
Sherpa Micro with UM2 PTFE coupler
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My attempt at installing a PTFE coupler (UM2 quick connector) to the Sherpa micro.
- Rating
- 4 / 5
- Likes
- 8
- Downloads
- 79
- Makes
- 1
- Views
- 571
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
My attempt at installing a PTFE coupler to the sherpa micro.
I really like the micro, but when unloading filament with the help of the extruder, it tends to push out the PTFE tube.
It uses a UM2 quick connector that I have salvaged from an old e3D v6 clone. You could also source it yourself online.
Due to the clearances, you need to snip off a bit of the connector so it can fit, as shown in the photo.
The STEP file is also included so you can adjust it to your printer's tolerances.