Reversed Phone Support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I reversed the orientation of the phone support, in case you accidentally used the wrong side of the "frame/body" part.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 28
- Makes
- 0
- Views
- 418
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I accidentally used the other side of the frame to connect the legs and arms, and only realized when I was about to attach on the phone support bits to the frame.
The model leaves enough room for a USB-C/Micro USB/Lightning Port to fit through in between the support so you can still use the exo-suit while charging.
Model printed with Prusament PLA Jet Black at 0.20mm using Prusa Mini+ (Bondtech Extruder), with Brim and Organic Supports. Brim and Supports may not be needed, but I used them just in case. Upright should be the best orientation for no/minimal supports.