1 / 6
Knife Drawer Organizer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Knife drawer organizer
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 42
- Makes
- 0
- Views
- 461
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
A simple knife block used to store knives in the vertical position in a kitchen drawer.
I used cura to slice this and found it to be extremely slow, let me know how yours worked out in the comments!
Settings - I printed this model with a 0.8mm nozzle, but a 0.4mm nozzle should work fine as well.
Layer height: 0.2mm
Walls: 1 (0.8mm nozzle) - If using a 0.4mm nozzle I would do minimum 2 walls and that will make the slats all wall.
Supports: None
Infill: 10%+