[Gridfinity 2x1] Battery Tray for 3x Sony NP-FW50
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This battery try holds up three Sony NP-FW50 and is compatible with Gridfinity.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 140
- Makes
- 2
- Views
- 456
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
Print time ~20 Minutes
Filament ~20 Grams
F3D File included, if you want to customise it a bit more
The fit is not overly snug, the batteries are loose but don't shake too much.
Print Settings (Ankermake M5C)
Nozzle 0.6mm
Filament PLA+
Layer Height 0.40mm
Layer Width 0.62mm
Perimeters 2
Top / Bottom Solid Layers 2
Seam Position Aligned
Infill 10% Rectilinear
You might need supports. (depends on your nozzle, material & printer).
If that is the case, use an overhang threshold of 50 and auto-generate the supports. This way, you get a nice and clean bracket for your Gridfinity Grid.
