1 / 2
Lenovo M720q bracket for dual 2.5g i226 card — image 1
1 / 2

Lenovo M720q bracket for dual 2.5g i226 card

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple bracket to hold a dual i226 network card inside a lenovo m720q tint.

Rating
5 / 5
Likes
29
Downloads
447
Makes
1
Views
1,918
Reviews
2

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution

This is a very simple bracket to install a dual i226-v network card into a Lenovo M720q tiny. The bracket does not require any support, once printed, snap or cut off the part on the right, stick it through the protruding pins and weld in place with either a soldering iron or any heated instrument. It's designed to allow placement of two holding screws, one from the side of the case and one in the back from the inside.

There are two versions of the model, one with 4x 4x4mm ventilation holes on each side, and one with much bigger 10x10 holes. Once printed you can also snap the dividers with a pair of side cutters and open up the model with smaller holes.

This was used with a dual i226 card from aliexpress, either this or a similar model:
https://aliexpress.com/item/1005006363096344.html

I made another simple modification of this model, to be used with a Mellanox Connectx-3 single sfp+ card:
https://www.printables.com/model/1385072-lenovo-m720q-bracket-for-connectx-3-single-10g-car

Tags