PRUSA MK4 - LCD Toolholder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.33 – €0.40 net (excluding VAT)
For file: Prusa MK4 - LCD Toolholder_0.4n_0.2mm_PLA_MK4IS_17m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.36 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 17.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Uses the gap between the xLCD and the printer frame of your MK4 to fit a magnetic tool holder for tweezers.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 41
- Makes
- 1
- Views
- 509
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
As I saw the other mods to fill the gap between the LCD screen and the frame of the MK4 I thought this might be a great place to store my tweezers as they are my most used tool. The space is exactly the right size and just needed some magnets to hold the tweezers or other small metal tools securely in place during fast printing moves.
All you need is five 10x3mm round Neodymium magnets that friction fit perfectly in the added holes in the bottom of the part.
To install you just need to loosen the 4 screws of the LCD mount, slide the toolholder in (after you inserted the maganets of course) and tighten the screws again for a secure fit.