MOWOS - Modular Overengineerd Whiteboard Organization System

MOWOS is a modular organizational system for the whiteboard. With it, you can decide whether you need a large container, a small container, or a shelf. I designed this system because I didn't like any other templates, or some templates were intended only for specific whiteboard markers with certain diameters. Additionally, I wanted to create a system where I could securely store an eraser, a spray bottle with cleaning solution, and my magnets.

The mounting plate of the system fits into the existing rail on my whiteboard (which I have seen on every whiteboard so far). The boxes or the shelf are then simply attached to the mounting plate.

Dimensions in mm (width x height x depth):

• small container = 100 x 35 x 70
• large container = 100 x 70 x 70
• shelf = 100 x 20 x 70

Print Settings

Printer Brand:

Anycubic

Printer: 

Kobra 2 Max

Rafts:

Doesn't Matter

Supports: 

Doesn't Matter

Resolution:

0.2

Infill: 

15-30

Filament: Polymaker PLA+ red

Please check beforehand:

If your whiteboard does not have a rail in the frame, then this model is unfortunately not suitable for you. Please verify in advance whether the model can be attached to your whiteboard.

Requirements

For each individual module:

• 2x M5 threaded inserts 
• 2x M4 threaded inserts 
• 2x M5 screw 
• 2x M4 screw

CAVE: No M4 threaded inserts or M4 screws are needed for the small container!

Instruction

For each individual module, two M5 threaded inserts and two M4 threaded inserts are needed. These are melted into the mounting plate. Subsequently, you can attach the desired box or shelf with two M5 and two M4 screws. (No threaded inserts or M4 screws are needed for the small box).

Happy printing! If you like the design, please leave a like or a comment! :)

Constructive criticism is welcomed!

Category: Office