CYD Display mount for Voron Trident and 2.4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
CYD Display mount for Voron Trident and 2.4
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 51
- Makes
- 1
- Views
- 541
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Voron Trident and 2.4 owners, here is a screen mount to use the newly released CYD Klipper display. I is a low cost alternative to Klipperscreen. While it is less feature-rich, its $10 to $15 price tag is very appealing.
The install instructions can be found here:
https://github.com/suchmememanyskill/CYD-Klipper
Needed Hardware: 4x M3 6mm screws, 2x M4 10-12mm, 2x M4 t-nuts (any type)
Optional Harware: 4x M3 heat set inserts
There are two options for fasters: One front bezel uses heat set inserts and the other option allows the M3 screws to be threaded into the plastic (not preferred).
Assembly: insert the screen into the front bezel then slide that assembly into the mount. Insert the 4 M3 retaining screws from the back.