1 / 2
circuit board vice clampable. Schraubstock für Platinen Klemmbar — image 1
1 / 2

circuit board vice clampable. Schraubstock für Platinen Klemmbar

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

You need a compression spring round about 17.5x10mm.

Rating
0 / 5
Likes
9
Downloads
62
Makes
0
Views
540
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

Circuit board vice for clamping or other similar workpieces.
You will need a compression spring round about 17.5x10mm.

To tighten the worpiece, press the silder against it with the latch pressed down. Release the latch when the Workpice sits good. Then use your index finger and middle finger on the silder and your thumb on the head end of the base to press the silder one more notch further. Push down the latch to release.

 

Simpler Schraubstock zum Klemmen von Platinen oder ähnliches.
Sie brauchen eine Druckfeder ca. 17.5x10mm.

Zum fest verspannen des Werkstücks, den Silder mit gedrücktem Riegel gegen das Werkstück drücken und den Riegel loslassen. Anschließend mit Zeigefinger und Mittelfinger am Silder und Daumen am Kopfende der Basis den Silder noch eine Raste weiter drücken. Zum lösen den Riegel runterdrücken.

Tags