1x3 Gridfinity Caliper Stand
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.71 – €3.32 net (excluding VAT)
For file: 1x3 Caliper Stand_0.2mm_PLA_MK3S_3h17m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.02 excluding VAT (range midpoint).
- Weight reported by the author
- 32 g
- Print time reported by the author
- 3.29 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This 1x3 gridfinity module holds a digital caliper horizontally.
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 162
- Makes
- 4
- Views
- 636
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
This 1x3 Gridfinity module holds a digital caliper horizontally. It is stable even without a baseplate.
It is based on this model: https://www.printables.com/model/503777-caliper-stand
@spikeon requested this 1x3 version so the head end doesn't stick out past the end of the base. So this is a remix of the 1x2 version.
It prints without supports, but I recommend watching the first layer go down to ensure the circles around the magnets all stick as expected. Once the first layer is down the rest should print with no issues.
I sliced it for PLA with 0.2mm layers. If you re-slice it, I recommend 3 perimeters and to print the outer layers first.
I added a brim to help avoid the two farthest edges from lifting up during the print.
This one was printed using PLASPORT tricolor coextruded silk filament (emerald green / purple / yellow) using my spool rotator.
Based on the Gridfinity System from Zack Freedman: https://thangs.com/designer/ZackFreedman
https://www.youtube.com/c/ZackFreedman
License: CC BY-NC-SA 4.0 https://creativecommons.org/licenses/by-nc-sa/4.0/
#gridfinity