Cable Hole Plugs for Modular Hydroponic Tower Garden
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular Hydroponic Tower Garden Additional Parts
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 58
- Makes
- 1
- Views
- 583
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Please note, this part is intended strictly for the "filling_module_cut.stl" or "filling_module_cut_mod_01.stl" files.
I recently printed the Modular Hydroponic Tower Garden with the filling module that has 2 cut-outs on each side. I only needed to use one for the pump power cable, which is 6.25 mm thick. Both sides would leak a decent amount with each 15-minute cycle, so I created this simple slot insert.
I do not recommend installing on an assembled tower, slide the plugs upwards from the threads. Minimal hot glue or your preferred non-toxic glue to seal around the cord and slot to ensure it's watertight.