Parametric Dust Cyclone
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dust cyclone used for dust collection.
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 116
- Makes
- 0
- Views
- 1,012
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This is a dust cyclone that can be used with a dust collection system. The Fusion 360 file is parametric so it can be easily resized. However, if you go too far outside of the main parameters you may need to tweak the model some.
This is a two-piece unit which makes it easier to print a taller version. The current 3mf files are pretty large and require a larger volume printer. I think they are currently setup for a 2.5" hose and require around 270mm height.
I printed the cone right side up and the top upside down with support for the inlet.
Update: It looks like the resizing of the inlet is not working under the current version of Fusion 360. It looks like it's possibly related to the constraints in the Inlet profile. So, if you need to update the inlet size you will likely have to rework that part of the file.