Canon EC-6 Eyepiece Eg Extender for EOS DSLR Cameras
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Eyecup extender for Canon EOS DSLR cameras that uses Eg eyecups. Reuse your rubber eyecup.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 192
- Makes
- 0
- Views
- 1,080
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
One of the most popular/visited reviews on our site is the JJC EC-6 Eyepiece Eg Extender. If you're not familiar with the eyepiece extender, it extends the eyecup 5/8" (15mm) from the camera body. This is useful for eyeglass wearers and others to keep the tip of the nose from touching the camera screen.
We have been getting emails on where the aftermarket eyepiece extender can be purchased from. Unfortunately, they are discontinued and no longer being made even though the Canon eyecup (Eg) is still being used on Canon DSLR cameras.
But to help other photographers out who are searching for this extender, we created a CAD file of the eyepiece extender which will allow us to print a 3D model of it. The 3D printed version is almost an exact duplicate of JJC version but with some slight improved modifications:
- Aftermarket : The 3rd party extender came with its own eyecup with a flat back which is slightly different from the Eg eyecup that comes with your camera.
- 3D Printed : Grooves were cut out so that the OEM (Eg) eyecup that came with the camera can be reused without have to buy new ones. If you lost or need replacements, you can purchase them online from Amazon or eBay.
- Aftermarket : The 3rd party extender came with a cheap plastic lens to "help" magnify your view.
- 3D Printed : Sole purpose of this is to extend the eyecup so that your face is not near or touching the screen. Also, the plastic lens only made your view even more distorted.
One thing that will still be the same is that some of the corners may be cut off when looking through the viewfinder because your view is now further away. Also, the viewfinder and OEM eyecup is rectangular while the extenders opening is a square. So this will require you to make slight adjustments to the positioning of your head when looking through the viewfinder.
The eyepiece extender fits the following Canon EOS cameras that uses Eg eyecups:
- 7D
- 7D Mark II
- 5D Mark III
- 5D Mark IV
- 5DS
- 5DS R
- 1D C
- 1D Mark III
- 1D Mark IV
- 1D X
- 1D X Mark II
- 1D X Mark III
- 1Ds Mark III
Now that Canon has gone mirrorless, I think it's time for me to release this to the public.
When printing, have it printed standing up with supports on so that the interior is supported. I've printed hundreds in PLA with no issues.
