Nendoroid Kick Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An accessory to display a Nendoroid without the base
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 363
- Makes
- 2
- Views
- 1,550
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple accessory to display a Nendoroid without the official base. There are two parts to this print, a peg and the kick stand. Print the parts in their default orientation, and then snap them together. I recommend printing this in PETG.
Note: May not be compatible with tall Nendoroids, or with capes/back accessories
To assemble, press the kickstand onto the peg:
There is a groove on the bottom side of the kick stand to make inserting the peg easier:
If the parts don't snap together nicely, you may need to adjust the “XY Size Compensation” or similar setting in your slicer.