1 / 4
KTM 1290 Super Duke GT Quad Lock Mount (updated) — image 1
1 / 4

KTM 1290 Super Duke GT Quad Lock Mount (updated)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A rough and ready mount for the 2020 KTM 1290 Super Duke GT that will accept the Quad Lock mount.

Rating
0 / 5
Likes
9
Downloads
136
Makes
0
Views
1,521
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial — Share Alike

In my case, when mounting this I found the original KTM display screws too short and so replaced them with some M5 x 12mm Socket Flanged Button Screws (ISO 738002) Stainless Steel (A2) from Accu, along with some 5.3mm x 10mm x 1mm Flat Washers - TPR Rubber, to be extra safe. 

Mine is in PLA as I was out of PETG but yes, I recommend PETG as it's an outdoors thing and with a fair bit of vibration going on. 30% infill or whatever you are happy with, and I went with 0.3mm layer height.

 

UPDATE November 2024:
 - The latest version (v5) has a slightly updated Quad Lock mount that better prevents rotation provided you're using the vibration damper. Also a bunch of random holes from the original model have been filled in. 

 - This new version also elevates the mount slightly so that the phone can go in portrait orientation without too much overlap of the TFT. The phone in the image is an S10+ which is apparently 149.9mm tall.

 - Note: I do run my screen with a 5mm spacer on the top mounts, and it's a Puig Touring Screen, so you may need to consider this to ensure no rubbing.

UPDATE September 2025:

  • After approximately 6,000 miles the mount snapped at the weak points between the plate where we mount the Quadlock, and the main support. I'll be refactoring to reinforce this. Expect an update!

Tags