1 / 2
Filament tube guide for 6 PC4-M10 connectors Prusa i3MK3S — image 1
1 / 2

Filament tube guide for 6 PC4-M10 connectors Prusa i3MK3S

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Plate for 6 PC4-M10 pneumatic connectors. Clips to existing Prusa filament spool holder.

Rating
5 / 5
Likes
37
Downloads
121
Makes
3
Views
1,445
Reviews
2

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

Simple PC4-M10 mounting plate. Holds up to 6 connectors, clips to the existing spool holder vertical arm on the i3MK3S.

I needed something simple to guide my filament tubes from my dry box to a usable position above the Prusa print head.  I really did not want to have to keep swapping over filament/tubes etc.

Holds up to 6  PC4 - M10 connectors through which my filament tube pass.

Note, the clip is intentionally “tight”  - If I need to adjust things on the printer I just un-clip the spool holder with this tube guide and all the tubes left in place, in my case that is much easier than un-clipping the clamp.

I have also provided the threaded nut prints that I use to secure the PC4 - M10 connectors to the plate - I did not want to thread the holes in the plate as any damage to one hole would mean a new print.

Printed in PETG at 0.2

Tags