GX591 Spot Welder Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple case to prevent any type of shot circuit
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 80
- Makes
- 2
- Views
- 497
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A case for this spot welder: https://dvq4.short.gy/NRlgzA
It's meant to prevent any type of short during operation, you can add a square of methacrylate to prevent anything from entering from the display side.
The case it's meant to be opened and closed many times so you will ned some heat inserts like these ones: https://dvq4.short.gy/sOxDcW Length 4mm 50pcs, M3(OD4.2mm)
If you don't have a battery, I suggest this one: https://dvq4.short.gy/s8ojMP (Choose 60C XT60)
Finally, to assemble it all together, you need 4 M3x12 screws, if you don't have at home and you like tinkering around, I suggest buying a set of M3 screens like this one: https://dvq4.short.gy/KrUiNK
After making this case, I found that Illia Dudnyk had made a better one; check it: https://www.printables.com/es/model/686151-gx591-spot-welder-case