Eibos EasDry Doors
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple doors at back of ventilation holes. So wet air can't go back when you are not using drying cycle
- Rating
- 4.667 / 5
- Likes
- 20
- Downloads
- 62
- Makes
- 3
- Views
- 854
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I buy Eibos Easdry not only for drying filament but also as dry box for filament when i'm printing. But when i'm not using drying cycle then i'm getting back wet air from outside. I'm using filament dryer plug ( https://www.printables.com/model/137021-eibos-filament-dryer-plug ) and Eibos EasDry Desiccant Bucket ( https://www.printables.com/model/429352-eibos-easdry-desiccant-bucket ) but still i have problem with rising humidity. So i made doors which i can close when is not dryer at work :) You can see opened door from front when they are opened as a indicator when i can run dryer. On doors are 4 platforms for use double tape for securing doors at dryer. You should use thin double tape or you will have big gap. All openings from dryer are perfectly clear when you tape them on right place. At doors you can use 4 x 2 mm magnets for securing them so they don't open themself.
Don't close doors when is dryer working!