1 / 8
Armattan Beaver arm protector
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parts are interlocking each other during assembly.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 98
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
Designed to be printed from hard material, ASA, PET, etc
Parts are interlocking each other during assembly.
Screws for motors needs to be 0.5mm longer than those used normally.
In my case, the screw is only one last turn too short. So I stay with original.
Version 2
V2 has different locking shape, it wont fit V1, but it should be more tight
Screws needs to be 1mm longer this time
There is also larger protector, but it needs to be printed from flex material with supports.
Flex one should provide more impact protection and more durability