1 / 5
Bearingless Neptune 4  Lead Screw plate (Lead Screw Binding fix?) — image 1
1 / 5

Bearingless Neptune 4 Lead Screw plate (Lead Screw Binding fix?)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replaced the Lead Screw top plates on the Z axis. Do you need them? Nope. Could just run without the plates

Rating
0 / 5
Likes
17
Downloads
57
Makes
0
Views
1,107
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This replaces the Lead Screw top plates on the Neptune 4s. Why would you do that? My friend has a Neptune 4 Pro that has been suffering from Z bands on his prints. We went through all the standard checks (belts, eccentric nuts, pom nuts, coupler spacing, etc..) 

None of that stuff fixed the issues, remembering a similar issue on my old resin printer, I pulled the top plates off both to see if they were restricting movement in the Lead Screws…and well, yeah things got MUCH better after. 

THESE PLATES SOLVE NOTHING! All they are for is to replace the stock one and give you the cable pass through ports for the run out sensor and lets the lead screws do what they want. 

When pulling the plates with the bearings off the Z Sync cable is REALLY lose on this printer, might not be normal, but keep an eye put of it. It still moves, but I don't think its as effective, so you will probably need to check gantry level more often. 

Anyway, here is my work that does nothing, but killed some time. Feel free to remix it if you have time to burn. 

Tags