1 / 6
QIDI X-MAX 3 material break detector raising bracket.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The angle is parallel to the outlet of the spool bracket and the PTFE tube connected to the extruder module.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 105
- Makes
- 1
- Views
- 721
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Disassemble the original material break detector, use the removed screws x 4, and install the fixed lifting bracket.
Use M3x18 x4 (M8x16 can also be used) to lock the broken material detector.
The left handle is inlaid with a spool bracket, model link:https://www.printables.com/model/750704-qidi-x-max-3-handle-inlaid-spool-holder
Need the following:
- QIDI X-MAX 3 material break detector raising bracket.
- M3x18 x4 (M8x16 can also be used).
https://s.click.aliexpress.com/e/_oBRuvVk - 2*4mm PTFE (for 1.75mm Filment) 30 cm.
High Transparency 2x4mm PTFE Tube：
https://s.click.aliexpress.com/e/_Dn5Qfxj
5 Colors 2x4mm PTFE Tube Teflonto ：
https://s.click.aliexpress.com/e/_Eus1G3x - 4PIN Dupont TJC8A 2.54mm Extension Wire Cable Connector (Male to Female) 20cm.
https://s.click.aliexpress.com/e/_DegcUJr - Mini Portable PTFE tube cutter
https://s.click.aliexpress.com/e/_onABCzC - Cut PTFE to a length of 11CM (PTFE tube between extruder and material break detector)
- The left handle is inlaid with a spool bracket.