1 / 4
Bungee Rope Shoe Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modern printed shoe case with an integrated bungee rope :)
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 246
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
0.3MM Layer Height (Or Higher Quality), 15% Infill, No-Brim (Or Raft), No Support.
Bungee Rope 5mm Diameter, 3 meter long needed for 50cm span (6 Strokes X span length) - max. recommended span is 60cm wide, to avoid rope sagging.
Note : To split the STL to separate objects, this can be done in the slicer software, by right clicking on the model and selecting Split To Parts/Objects or similar named command.