Can holder for mounting on a crutch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Standard 330ml or 500ml can holder mounter for mounting on crutch with cable ties
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 43
- Makes
- 0
- Views
- 472
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
While in Norway in the winter, the roads tend to be extremely slippery and people may end up with a broken leg, hopping along on crutches for a while. During this time, it's not joyful to go to the kitchen to grab a can of soda (or something). A friend of mine broke his leg and asked if I could make one, so I just hacked together this one in OpenSCAD to be mounted on a crutch using cable ties.
Apparently, this model is made for German cutches, 20mm thick and Norwegian ones are thicker, 21mm or so. I have uploaded the OpenSCAD model now so that it can be changed as suited. Keep in mind that this is work in progress and there's a lot of junk code there that doesn't want to be seen - it'll be fixed - one day - but it works. To edit the diameter of the crutch, see crutch_d, to make a very small version of the can holder (only), see full_test. I will upload more models later, but not tonight…
Please see https://github.com/rkarlsba/openscad/blob/master/begerholder/boksholder-krykke1.scad for the code - keep in mind that this is work in progress, so there will be bugs. I'll upload a “stable” one once it's ready ;)
Any sane print settings should work. No support needed.