Octopus Base
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.73 – €7.00 net (excluding VAT)
For file: Octopus Base_0.2mm_PLA_MK3S_6h29m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.36 excluding VAT (range midpoint).
- Weight reported by the author
- 77 g
- Print time reported by the author
- 6.49 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This Tentacle System component provides two regular ball bases and six pin-and-socket connection points.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 20
- Makes
- 0
- Views
- 206
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
This is a configurable base for the Tentacle System. Used in combination with the Tentacle Connector Kit, you can build a durable base to hold up to eight tentacles.
There are two regular ball bases and six stumps that each end in a pin compatible with the Connector Kit.
The shape helps keep the center of gravity in a position to stabilize a longer tentacle. If necessary it is easy to add weight to the opposite side, for example with a series of washers or nuts slid over an extension, or attached to a magnetic grip.
You can arrange a collection of grips and rotate the entire base to bring the most useful ones into your workspace. You can pick up the entire collection by the head with a single hand to move or store it.
Googly eyes are optional, but recommended; however, they should be different sizes.
This was printed using the Spool Rotator with Plasport emerald/purple/yellow coextruded Silk PLA filament.
You can learn all about the Tentacle System here: https://3ddoodle.com/tentacle-system/