1 / 1
Hold Down Clamp for Atomstack Laser Cutter / Engraver Honeycomb Bed
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clamp for holding down materials on an Atomstack laser cutter honeycomb bed.
- Rating
- 5 / 5
- Likes
- 132
- Downloads
- 1,066
- Makes
- 4
- Views
- 3,031
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
A clamp for holding down wood or other material on the honeycomb bed for an Atomstack laser cutter. It may work on other beds but it was specifically designed for the Atomstack bed and fits very snugly. You can scale it down slightly if you find it too tight.
There are two different versions available, 16mm for thinner materials and 32mm for thicker ones. If you need another height, let me know and I can upload one.
The arms are only 1.3mm thick so they should clear under the laser under most circumstances.