Two YoYo
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.61 – €3.19 net (excluding VAT)
For file: Two_0.6n_0.2mm_PLA_MK3S_2h35m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.90 excluding VAT (range midpoint).
- Weight reported by the author
- 43 g
- Print time reported by the author
- 2.58 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This yoyo is my first public entry into YoYo design and is designed to compete with traditionally Manufactured Yoyos.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 142
- Makes
- 0
- Views
- 899
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
I had a number of people MUCH better at yo-yoing than me test this throughout the entirety of the development and give me essential feedback as to what I need to do to improve it. I have learned so much about how a yoyo works in this process and it has improved my own skill.
I used 3/8” stainless steel slingshot ammunition to make this yoyo's weight distribution better The yoyo is an organic shape with a comfortable feel and fun play style. you are able to do many beginner to advanced tricks with it and people of all ages have fun with it!
DESIGN DETAILS FOR NERDS (like me lol)
Tech Specs:
| DETAIL | VALUE |
|---|---|
| WEIGHT | 67g |
| WIDTH | 49.5mm |
| DIAMETER | 59.5mm |
| BEARING | Size C |
| AXLE STYLE | M4x20 Hex Bolt and Nylock Hex nut |
| RESPONSE PADS | YYF 19mm Pads |
| SIZE OF WEIGHTS | 3/8” |
| # OF WEIGHTS (TOTAL) | 6 |
3D printing is at a point that yoyos that do not vibrate (yoyo vibe) is not currently possible. I believe within the next decade and a half we may see a 3D printing technology capable of much greater precision which will allow for better printed yoyos. I figure in the meantimes I better get to work on my designs though lol
I have hardware kits available on my website here. I also sell the fully printed yoyo there and I sell the files for a discount over there so check it out!
BUILD GUIDE:
The building process is I would say moderately difficult and uses some unique techniques to get this yoyo spinning as good as it does.
STEP 1: Parts list
| Item | Quantity needed | Link | Notes |
|---|---|---|---|
| Standard 19mm Response pads | 1 (pair) | 1 | Used in so many yoyos!!! These may suprise you if you are new to yoyoing |
| M4 hex bolt | 1x | 2 | These can often be found at your local hardware store. |
| M4 hex nut | 1x | 3 NYLOCK | These can often be found at your local hardware store. Nylock also works really well. |
| 3/8” Slingshot ammo | x6 | 4 | I like Umarex but there are others I have tested and they are totally fine. they just need to be 3/8th’s of an inch in diameter consistently! |
| Size C concave YoYo bearing | 1 | 5 | Bearings can be expensive! included is my budget link lol |
| YoYo String | 1 | 6 | If you are new you will need to get some! |
Here is an Image of all the hardware listed in the table above.
STEP 2: Printing
- Use a minimum layer height of .2mm but if you want to go with adaptive that is also fine. I highly recommend using the printing settings outlined in the .3mf file.
- Put a pause at 10.6mm to allow you to insert the weights.
- Print and insert weights
- Insert the bolt, nut, bearing, and response pads and then screw the yoyo halves together.