1 / 4
overcomplicated soldering sponge holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
holder for 68x68mm sponge used for cleaning tips of soldering iron with antislip bottom
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 25
- Makes
- 0
- Views
- 672
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Holder for 63x40mm sponge used for cleaning tips of soldering iron. For better stabily I recomed pour gypsum in and create silicone layer on bottom.
- print with brim, 3 walls, 5 top/bottom layers, PLA or PETG
- clean print
- mix gypsum really thin and pour it in the cubes on the bottom
- let it dry for 2-3 days (lot of water needs to be evaporated)
- put masking tape on flat surface, grease it lightly with mineral oil or grease
- cover bottom with silicone sealant
- lightly and evenly pres it on the masking tape
- let silicone cure
- trim exces silicone with box cutter and separate holder with silicone layer from masking tape
- place wet sponge and enjoy :)