Sapphire Plus / Sp-5 main carrier for XCR3D 2in1 v6 (remix) + Side Cooler for 4010 blower (remix)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sapphire Plus / Sp-5 main carrier for XCR3D 2in1 v6 (remix) + Side Cooler for 4010 blower (remix)
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 38
- Makes
- 0
- Views
- 442
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is a main carrier for XCR3D 2in1 hotend for a Sapphire Plus/Pro/SP-5 Bowden.
I love this hotend, never gave me any headache.
Used different part cooling fan guides, its a remix as well, changed them a bit.
Im not a professional CAD designer, it is just a hobby, I needed an upgrade. I hope others will find it useful as well.
Screws needed:
M3x26 4pcs (or longer) #for cooling fan and front plate (apply force when you put it in for the first time so it doesn't just strip the plastic)
M3x8 2pcs (or longer) #for main carrier front connection
M4x8 3pcs (or longer) #main carrier rear connection
M3x16 4pcs (or longer) #hotend to the main carrier
M2x12 4pcs #top of the part cooling fan guide
M2x20 4pcs #bottom of the part cooling fan guide (I cut the end of the screw diagonally with pliers to make it a kind of “self taping”)
Can be printed with 0.4 and 0.2 nozzles. Tested with 0.1 and 0.2 layers
Sliced with Prusa Slicer
Rear side face down.
Organic supports 0.2(detachable)
Brim 15mm (I would say its a must when using organic supports)
Infill 70%
Printed with color changing with temperature PLA
Installation:
1. Install part cooling fans into the guides.
2. Attach the guides to the main carrier with M2 screws.
3. Cooling fan goes thru the top, and comes from the front.
4. Hotend goes in from the bottom.
5. Attach hotend with M3x16 crews (I used 9mm in diameter washers)
6. Install front plate, attach it with M3x26 screws.
3/3/2024 minor update
Just added a service holes on the sides of the main carrier, so it will be easier to pull out the the heatbreak if there is a clog.(did not test if they are in the right position, did some approximation. On mine I just made a hole with exacto knife :)