1 / 5
Plywood Dolly
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dolly for 1/2"(12mm) - 1"(25mm) sheet goods.
- Rating
- 5 / 5
- Likes
- 63
- Downloads
- 130
- Makes
- 1
- Views
- 1,017
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a dolly for moving large sheet goods around. I printed it in Polymaker ASA with 4 walls and 15% gyroid infill. It's designed specifically for ¾" (18mm) thick but will accommodate ½" (12mm) to 1" (25mm).
Other Info.
Print on its side (see screencap) no supports needed. You'll need to drill out the holes for the threaded rod to fit; use an 8mm or 5/16" bit, and it'll fit just right. Put washers on either side of each wheel.
Non-Printed Parts
- 8mm threaded rod
https://www.amazon.com/gp/product/B0BK4Y4RKQ?ref=ppx_pt2_dt_b_prod_image
This should be cut down to around 125mm in length. - 4x 8mm washers
Amazon.com: 50pcs Black M8 Flat Washers(OD=24mm, 2mm Thickness) Grade 8 Carbon Steel, Zinc Plated : Automotive - 2x 8mm Nylon Locking Nuts
binifiMux 20Pcs M8 X 1.25MM 304 Stainless Steel Nylon Lock Nuts Inserted Hex Self Clinching Silver: Amazon.com: Industrial & Scientific - 2x 80mm Roller blade wheels (8mm bore)
I already had these on hand from another project. If I had to buy again, I'd get these:
Amazon.com : Rollerex VXT500 RipStik/Inline Skate Wheels (2-Pack w/Bearings, spacers and washers) - Use on Roller Blades, RipStik Caster Boards, RipSticks, Luggage, Baggage or Wheelchairs (Turf Green, 80mm) : Sports & Outdoors
Or, if you'd like to print your own - 80mm Dual-Bearing Wheel by JohnMartin | Download free STL model | Printables.com