Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.2 - ENGINE CRANCKCASE + ENGINE COVERS
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2nd part of my build
- Rating
- 5 / 5
- Likes
- 49
- Downloads
- 546
- Makes
- 3
- Views
- 2,067
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello, here you are the 2nd part of my motorcycle.
Hope the frame you printed without any issues :) https://www.printables.com/cs/model/738743-project-jawa-cz-kyvacka-25035302-part-no1-frame
In this case it is engine crankcase, the engine covers and the head. All parts belongs for a solo bike and the bike with sidecar also.
PRINTING INFORMATION
For print I recommend PLA, grey color, 100% infill.
- All parts except right engine cover you can print in 0.2 layer. I recommend 0.15 for better luck.
- The right cover must be printed in 0.1 layer. If not it brings a holes in the main shape!
- The cylinder head is cut into 2 pieces so the supports are not needed. Other parts needs them
- Because there are a lot of cooling ribs this models are very sensitive to correct print settings. I recommend printing at a lower temperature, otherwise the print will be too stringy.
If the printed settings are correct the bearings will can move ;)
AFTER PRINT
- Clear all models from supports and string hair
- Glue 2pcs of the cylinder head into 1 part.
- Store all parts in the box for now to avoid damage. More engine parts will follow in the some next part of my built.
ENJOY :)
3rd part is avaliable here: https://www.printables.com/cs/model/766034-project-jawa-cz-kyvacka-25035302-part-no3-front-fo