Turbine Turbo BL Motor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a small, functional radial turbine which uses a 1408 brushless motor.
- Rating
- 0 / 5
- Likes
- 52
- Downloads
- 225
- Makes
- 0
- Views
- 3,097
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Thanks to Evocato for the great turbo!
The turbo runs with surprisingly little vibration. At 12 V, the turbo can achieve up to 20 mbar at zero delivery. The turbo delivers approx. 440 liters per minute including a 45 cm long ID 18 mm CPAP hose. I measured the temperature on the drone motor and it doesn't get warm at all. I mirrored the rotor from Evocato for the correct direction, I recommend setting the Z-seam randomly to keep the imbalance as small as possible. I made a remix with a spiral casing, an intake funnel and a larger exhaust opening. The turbo now delivers more air. A CPAP hose with an inner diameter of 18.5 mm fits onto the outlet. Tuelle is for the original housing.
I used a 15V, 5A power supply for this. The turbo turns at 30,000 rpm at 12 V and 4.7 A. I control the 30 A ESC with a servo tester.
THE 100 v1.1.0.1 - Over 90 modified and new parts made. https://www.printables.com/de/model/596834-the-100-v1101