Stackable project box or small items box
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€7.52 – €9.19 net (excluding VAT)
For file: Project-Box 244x170x8,5 Lid_0.3mm_PLA_MK3S_6h11m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €8.36 excluding VAT (range midpoint).
- Weight reported by the author
- 150 g
- Print time reported by the author
- 6.18 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Stackable project box or small items box with lid and 4 different compartments
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 141
- Makes
- 1
- Views
- 578
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Stackable project box or small items box with lid and 4 different compartments. An edge running all the way around the bottom snaps easily into the box underneath. There is one box without subdivision, one with longitudinal division, one with transverse division and one box divided into quarters. Size 244mm x 170mm x 71mm each.
Ensures good adhesion, otherwise warping can quickly occur. Spray adhesive from 3D Jake was helpful for me, I can only recommend it.