LaGard 2270 lockpick
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attachments for a 6mm OD 5.2mm ID metal tube to make a lockpick for a LaGard 2270
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 36
- Makes
- 0
- Views
- 496
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Use a 6mm OD tube with 0.4mm walls: https://a.co/d/g5sFcvF. I used a dremel to cut a slot in the end of the tube for the tip to fit into and superglued it into place. Might have to file/sand the inside of the tube after. Handle attaches with m3 heat set insert and m3 screw. Screw also serves as a guide for degrees of rotation so tighten it when it lines up with the gap in the tip.
Handle attaches with m3 heat set insert and m3 screw. Screw also serves as a guide for degrees of rotation so tighten it when it lines up with the gap in the tip.