Revolver Station
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The perfect partner for your revolver.
- Rating
- 4 / 5
- Likes
- 214
- Downloads
- 522
- Makes
- 2
- Views
- 3,726
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The Revolver Station
After creating the revolver and the basic stand, I thought, wouldn't it be cool if I had a proper station that could not only hold my tool but also help me use it by separating out my bits, and giving me a few extra tools to help out whilst working.
If you enjoy this print please consider donating to my paypal, me and the mrs have a little one on the way and we're saving for baby stuff 😁. Thought this might do better than a gofundme.
https://www.paypal.com/donate/?hosted_button_id=FWZNBTYKYP2Z2
If you have any issues, please let me know and I'll be on hand to help out or make changes if necessary.
Assembly guide
This download includes a complete assembly guide with detailed instructions and diagrams.
Assembly Tips
- Make sure you use plenty of grease on parts which require it, especially the selector gear and sun gear in step 6, to ensure smooth operation.
- I recommend using a silicone grease as your lubricant as it's least likely to damage the plastic.
- As for glue, any typical super glue should be fine. I prefer the gel types which do not set immediately and allow for adjustment.
Printing Tips
- A 3mf file is included with suggested printing orientations.
- I used eSun PLA+ on my builds but feel free to experiment
- I printed at .16 layer height
- You can print walls and other large parts flat instead of upright, though I like the almost brushed stainless steel look you get from the layer changes when printing standing up.