1 / 1
The Flash HueForge Fanart
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Flash Inspired HueForge Fanart
- Rating
- 4.5 / 5
- Likes
- 26
- Downloads
- 98
- Makes
- 2
- Views
- 531
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
1 of a series of Justice League fanart hueforge projects I've been happily working on. I hope you like them!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ IIID Max White Transmission Distance: 5.6
PLA+ IIID Max Black Transmission Distance: 0.5
PLA+ IIID Max Red Transmission Distance: 4
PLA+ IIID Max Yellow Transmission Distance: 5
Swap Instructions:
Start with White
At layer #5 (0.48mm) swap to Black
At layer #6 (0.56mm) swap to Red
At layer #14 (1.2mm) swap to Yellow
At layer #18 (1.52mm) swap to White for the rest.